QM Issue with TB 2.8

[lady_cr0ft]

Hi, we are trying to install TrixBox 2.8 (with Asterisk 1.6), unfortunately
"AddQueueMember" is not executing. We already changed

exten => 25,3,AddQueueMember(${QUEUENAME}|
Local/${AGENTCODE}@from-internal)

exten => 27,3,RemoveQueueMember(${QUEUENAME}|
Local/${AGENTCODE}@from-internal)

TO

exten
=>25,3,AddQueueMember(${QUEUENAME},Local/${AGENTCODE}@from-internal)

exten =>
27,3,RemoveQueueMember(${QUEUENAME},Local/${AGENTCODE}@from-internal)


We have also enabled rewriteLocalChannels:

# Rewrites Local/XXX@ext channels in the format Agent/XXX
default.rewriteLocalChannels=true


We have included this line in extensions_custom.conf:

#include extensions_queuemetrics.conf


But still to no avail. When we checked our CLI we are not getting any
error. We are only getting these:

Manager 'admin' logged on from 127.0.0.1
Manager 'admin' logged off from 127.0.0.1



Here's our AMI credentials in configurations.properties:

cluster.trix.manager=tcp:admin:amp111@127.0.0.1


And our manager.conf:

[admin]
secret = amp111
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
read = system,call,log,verbose,command,agent,user
write = system,call,log,verbose,command,agent,user

[QueueMetrics]

When you log in to Asterisk, what do you see as "core show applications"?

[lady_cr0ft]

   -= Registered Asterisk Applications =-
        AddQueueMember: Dynamically adds queue members
              ADSIProg: Load Asterisk ADSI Scripts into phone
            AgentLogin: Call agent login
  AgentMonitorOutgoing: Record agent's outgoing call
                   AGI: Executes an AGI compliant application
         AlarmReceiver: Provide support for receiving alarm reports from a burglar or fire alarm panel
                   AMD: Attempts to detect answering machines
                Answer: Answer a channel if ringing
          Authenticate: Authenticate a user
            BackGround: Play an audio file while waiting for digits of an extension to go to.
      BackgroundDetect: Background a file with talk detect
                Bridge: Bridge two channels
                  Busy: Indicate the Busy condition
         ChangeMonitor: Change monitoring filename of a channel
           ChanIsAvail: Check channel availability
       ChannelRedirect: Redirects given channel to a dialplan target.
               ChanSpy: Listen to a channel, and optionally whisper into it
             ClearHash: Clear the keys from a specified hashname
            Congestion: Indicate the Congestion condition
         ContinueWhile: Restart a While loop
       ControlPlayback: Play a file with fast forward and rewind
            DAHDIBarge: Barge in (monitor) DAHDI channel
              DAHDIRAS: Executes DAHDI ISDN RAS application
             DAHDIScan: Scan DAHDI channels to monitor calls
  DAHDISendKeypadFacility: Send digits out of band over a PRI
              DateTime: Says a specified time in a custom format
                 DBdel: Delete a key from the database
             DBdeltree: Delete a family or keytree from the database
               DeadAGI: Executes AGI on a hungup channel
                  Dial: Place a call and connect to the current channel
               Dictate: Virtual Dictation Machine
             Directory: Provide directory of voicemail extensions
                  DISA: DISA (Direct Inward System Access)
              DumpChan: Dump Info About The Calling Channel
                  EAGI: Executes an EAGI compliant application
                  Echo: Echo audio, video, or DTMF back to the calling party
              EndWhile: End a while loop
                  Exec: Executes dialplan application
                ExecIf: Executes dialplan application, conditionally
            ExecIfTime: Conditional application execution based on the current time
             ExitWhile: End a While loop
              ExtenSpy: Listen to a channel, and optionally whisper into it
           ExternalIVR: Interfaces with an external IVR application
              Festival: Say text to the user
                 Flash: Flashes a DAHDI Trunk
              FollowMe: Find-Me/Follow-Me application
               ForkCDR: Forks the Call Data Record
              GetCPEID: Get ADSI CPE ID
                 Gosub: Jump to label, saving return address
               GosubIf: Conditionally jump to label, saving return address
                  Goto: Jump to a particular priority, extension, or context
                GotoIf: Conditional goto
            GotoIfTime: Conditional Goto based on the current time
                Hangup: Hang up the calling channel
         IAX2Provision: Provision a calling IAXy with a given template
                  ICES: Encode and stream using 'ices'
             ImportVar: Import a variable from a channel into a new variable
            JabberSend: JabberSend(jabber,screenname,message)
          JabberStatus: JabberStatus(Jabber,ScreenName,Variable)
                   Log: Send arbitrary text to a selected log level
                 Macro: Macro Implementation
        MacroExclusive: Exclusive Macro Implementation
             MacroExit: Exit From Macro
               MacroIf: Conditional Macro Implementation
         MailboxExists: Check to see if Voicemail mailbox exists
                MeetMe: MeetMe conference bridge
           MeetMeAdmin: MeetMe conference Administration
    MeetMeChannelAdmin: MeetMe conference Administration (channel specific)
           MeetMeCount: MeetMe participant count
             Milliwatt: Generate a Constant 1004Hz tone at 0dbm (mu-law)
         MinivmAccMess: Record account specific messages
          MinivmDelete: Delete Mini-Voicemail voicemail messages
           MinivmGreet: Play Mini-Voicemail prompts
          MinivmNotify: Notify voicemail owner about new messages.
          MinivmRecord: Receive Mini-Voicemail and forward via e-mail
            MixMonitor: Record a call and mix the audio during the recording
               Monitor: Monitor a channel
             Morsecode: Plays morse code
             MP3Player: Play an MP3 file or stream
                  MSet: Set channel variable(s) or function value(s)
           MusicOnHold: Play Music On Hold indefinitely
                 MYSQL: Do several mySQLy things
                NBScat: Play an NBS local stream
                 NoCDR: Tell Asterisk to not maintain a CDR for the current call
                  NoOp: Do Nothing (No Operation)
    NVBackgroundDetect: Background a file with talk and fax detect (IAX and SIP too)
           NVFaxDetect: Detects fax sounds on all channel types (IAX and SIP too)
            ODBCFinish: Clear the resultset of a successful multirow query
                  Page: Pages phones
                  Park: Park yourself
       ParkAndAnnounce: Park and Announce
            ParkedCall: Answer a parked call
          PauseMonitor: Pause monitoring of a channel
      PauseQueueMember: Pauses a queue member
                Pickup: Directed Call Pickup
            PickupChan: Pickup a ringing channel
              Playback: Play a file
             PlayTones: Play a tone list
        PrivacyManager: Require phone number to be entered, if no CallerID sent
            Proceeding: Indicate proceeding
              Progress: Indicate progress
                 Queue: Queue a call for a call queue
              QueueLog: Writes to the queue_log
        RaiseException: Handle an exceptional condition
                  Read: Read a variable
             ReadExten: Read an extension into a variable
              ReadFile: Read the contents of a text file into a channel variable
            ReceiveFAX: Receive a FAX
                Record: Record to a file
     RemoveQueueMember: Dynamically removes queue members
              ResetCDR: Resets the Call Data Record
             RetryDial: Place a call, retrying on failure allowing optional exit extension.
                Return: Return from gosub routine
               Ringing: Indicate ringing tone
              SayAlpha: Say Alpha
            SayCountPL: Say Polish counting words
             SayDigits: Say Digits
             SayNumber: Say Number
           SayPhonetic: Say Phonetic
           SayUnixTime: Says a specified time in a custom format
              SendDTMF: Sends arbitrary DTMF digits
               SendFAX: Send a FAX
             SendImage: Send an image file
              SendText: Send a Text Message
               SendURL: Send a URL
                   Set: Set channel variable or function value
           SetAMAFlags: Set the AMA Flags
         SetCallerPres: Set CallerID Presentation
        SetMusicOnHold: Set default Music On Hold class
          SIPAddHeader: Add a SIP header to the outbound call
           SIPDtmfMode: Change the dtmfmode for a SIP call
       SIPRemoveHeader: Remove SIP headers previously added with SIPAddHeader
            SLAStation: Shared Line Appearance Station
              SLATrunk: Shared Line Appearance Trunk
                   SMS: Communicates with SMS service centres and SMS capable analogue phones
            SoftHangup: Soft Hangup Application
  SpeechActivateGrammar: Activate a Grammar
      SpeechBackground: Play a sound file and wait for speech to be recognized
          SpeechCreate: Create a Speech Structure
  SpeechDeactivateGrammar: Deactivate a Grammar
         SpeechDestroy: End speech recognition
     SpeechLoadGrammar: Load a Grammar
  SpeechProcessingSound: Change background processing sound
           SpeechStart: Start recognizing voice in the audio stream
   SpeechUnloadGrammar: Unload a Grammar
              StackPop: Remove one address from gosub stack
      StartMusicOnHold: Play Music On Hold
        StopMixMonitor: Stop recording a call through MixMonitor
           StopMonitor: Stop monitoring a channel
       StopMusicOnHold: Stop Playing Music On Hold
         StopPlayTones: Stop playing a tone list
                System: Execute a system command
            TestClient: Execute Interface Test Client
            TestServer: Execute Interface Test Server
              Transfer: Transfer caller to remote extension
               TryExec: Executes dialplan application, always returning
             TrySystem: Try executing a system command
        UnpauseMonitor: Unpause monitoring of a channel
    UnpauseQueueMember: Unpauses a queue member
             UserEvent: Send an arbitrary event to the manager interface
               Verbose: Send arbitrary text to verbose output
        VMAuthenticate: Authenticate with Voicemail passwords
             VoiceMail: Leave a Voicemail message
         VoiceMailMain: Check Voicemail messages
                  Wait: Waits for some time
             WaitExten: Waits for an extension to be entered
           WaitForRing: Wait for Ring Application
        WaitForSilence: Waits for a specified amount of silence
       WaitMusicOnHold: Wait, playing Music On Hold
             WaitUntil: Wait (sleep) until the current time is the given epoch
                 While: Start a while loop
            Zapateller: Block telemarketers with SIT
    -= 172 Applications Registered =-

[QueueMetrics]

As you can see, you have AddQueueMember on your Asterisk system.

This is what I get for AddQueueMember on a 1.6.x:

Code: [Select]

Connected to Asterisk 1.6.1.6 currently running on pbx-ch (pid = 23691)
  -= Info about application 'AddQueueMember' =-

[Synopsis]
Dynamically adds queue members

[Description]
   AddQueueMember(queuename[,interface[,penalty[,options[,membername[,stateinterface]]]]]):
Dynamically adds interface to an existing queue.
If the interface is already in the queue it will return an error.
  This application sets the following channel variable upon completion:
     AQMSTATUS    The status of the attempt to add a queue member as a
                     text string, one of
           ADDED | MEMBERALREADY | NOSUCHQUEUE
Example: AddQueueMember(techsupport,SIP/3000)
So it looks like the application and its parameter are correct.

Try and set maximum verbosity and send again a request, to find which error you get.

[lady_cr0ft]

  Here's what I got:

-= Info about application 'AddQueueMember' =-

[Synopsis]
Dynamically adds queue members

[Description]
   AddQueueMember(queuename[,interface[,penalty[,options[,membername[,stateinterface]]]]]):
Dynamically adds interface to an existing queue.
If the interface is already in the queue it will return an error.
  This application sets the following channel variable upon completion:
     AQMSTATUS    The status of the attempt to add a queue member as a
                     text string, one of
           ADDED | MEMBERALREADY | NOSUCHQUEUE
Example: AddQueueMember(techsupport,SIP/3000)

[QueueMetrics]

Same as mine 

Try and run the command, if it breaks it should log WHY it breaks - see also the /var/log/asterisk/full  file for hints...

[lady_cr0ft]

  What do you mean by run the command? Sorry, I'm not yet well versed on these stuff..

[QueueMetrics]

You try to do an AddMember from QM with Asterisk set to maximum verbosity - if it does not work it will print out WHY it does not....

[lady_cr0ft]

  thanks! Here's what's in my /var/log/asterisk/full

[Nov 13 04:02:01] VERBOSE[3563] logger.c:   == Parsing '/etc/asterisk/logger.conf': [Nov 13 04:02:01] VERBOSE[3563] logger.c:   == Found
[Nov 13 04:02:01] VERBOSE[3563] logger.c:  Asterisk Event Logger restarted
[Nov 13 04:02:01] VERBOSE[3563] logger.c:  Asterisk Queue Logger restarted
[Nov 13 04:02:02] VERBOSE[3563] logger.c:     -- Remote UNIX connection disconnected
[Nov 13 04:56:34] VERBOSE[2520] logger.c:     -- Unregistered SIP '5366'
[Nov 13 05:11:03] VERBOSE[2496] logger.c:     -- Remote UNIX connection
[Nov 13 05:11:03] VERBOSE[3684] logger.c:     -- Remote UNIX connection disconnected
[Nov 13 05:11:03] VERBOSE[2496] logger.c:     -- Remote UNIX connection
[Nov 13 05:11:04] VERBOSE[3686] logger.c:     -- Remote UNIX connection disconnected
[Nov 13 05:11:04] VERBOSE[2496] logger.c:     -- Remote UNIX connection
[Nov 13 05:11:04] VERBOSE[3688] logger.c:     -- Remote UNIX connection disconnected
[Nov 13 05:11:04] VERBOSE[2496] logger.c:     -- Remote UNIX connection
[Nov 13 05:11:05] VERBOSE[3690] logger.c:     -- Remote UNIX connection disconnected
[Nov 13 07:00:47] VERBOSE[2999] logger.c:     -- Remote UNIX connection disconnected
[Nov 13 07:22:36] VERBOSE[3724] logger.c:   == Manager 'admin' logged on from 127.0.0.1
[Nov 13 07:22:37] VERBOSE[3724] logger.c:   == Manager 'admin' logged off from 127.0.0.1
[Nov 13 07:22:37] VERBOSE[3733] logger.c:   == Manager 'admin' logged on from 127.0.0.1
[Nov 13 07:22:37] VERBOSE[3733] logger.c:   == Manager 'admin' logged off from 127.0.0.1
[Nov 13 07:23:49] VERBOSE[2496] logger.c:     -- Remote UNIX connection
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/extconfig.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/manager.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/manager_additional.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/manager_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/logger.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:  Asterisk Event Logger restarted
[Nov 13 07:23:49] VERBOSE[3736] logger.c:  Asterisk Queue Logger restarted
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features_general_additional.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features_general_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features_applicationmap_additional.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features_applicationmap_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features_featuremap_additional.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/features_featuremap_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:     -- Added extension '700' priority 1 to parkedcalls (0x9de68c8)
[Nov 13 07:23:49] VERBOSE[3736] logger.c:     -- Reloading module 'res_phoneprov.so' (HTTP Phone Provisioning)
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_general_additional.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_general_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_nat.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_registrations_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_registrations.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_custom.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_additional.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/sip_custom_post.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found
[Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Parsing '/etc/asterisk/phoneprov.conf': [Nov 13 07:23:49] VERBOSE[3736] logger.c:   == Found

[QueueMetrics]

I see no trace of a call being sent to it.....
 

[criceto]

Hi

I have exaclty the same problem (trixbox 2.8 with asterisk 1.6.0.10, QM 1.5.5)

the add member button don't seems to work, the only entry I see is following:

Manager 'admin' logged on from 127.0.0.1
Manager 'admin' logged off from 127.0.0.1


Thanks

bye

Moreno

[QueueMetrics]

Did you include the QM dialplan?

[criceto]

yes

---------snip----------
; This file contains example extensions_custom.conf entries.
; extensions_custom.conf should be used to include customizations
; to AMP's Asterisk dialplan.

; All custom context should contain the string 'custom' in it's name

; Extensions in AMP have access to the 'from-internal' context.
; The context 'from-internal-custom' is included in 'from-internal' by default

#include extensions_queuemetrics.conf
#include extensions_hud.conf

[from-internal-custom]

----------snap-----------

[QueueMetrics]

if you do a dialplan show you see it?

[criceto]

Yes, i can see the queuemetricis part!

Thanks