Author Topic: All pause codes displaying "-"  (Read 3534 times)

Alexvs

  • Newbie
  • *
  • Posts: 7
  • Karma: 0
    • View Profile
All pause codes displaying "-"
« on: January 28, 2011, 16:04:03 »
Hi,

On our Realtime report we have always had issues with agents setting the correct pause code so we've enabled the forcing of pause codes in the config file which works fine, however no matter which code is selected we only ever see "-". We've logged in and done multiple tests as an agent to see if it was them doing it incorrectly or the system and seeing as they can no longer choose "-" as it's not a valid pause code it has to be a system issue.

Is there a quick fix to this issue as we need to be able to monitor our agents in realtime and know what they're doing?

Thanks

QueueMetrics

  • Loway
  • Hero Member
  • *
  • Posts: 2999
  • Karma: 39
    • View Profile
    • QueueMetrics
Re: All pause codes displaying "-"
« Reply #1 on: February 01, 2011, 16:49:31 »
If you run a report, do you see the pause codes being correct or not?
And what gets written to the queue_log file when an agent goes on pause?

Alexvs

  • Newbie
  • *
  • Posts: 7
  • Karma: 0
    • View Profile
Re: All pause codes displaying "-"
« Reply #2 on: February 01, 2011, 17:43:44 »
The detail of agent pauses report shows some codes correctly with the majority displaying "-" in both code and activity columns.

Hopefully this is the info you require but this is taken from Asterisk when an agent pauses:

Executing [22@queuemetrics:4] System("Local/22@queuemetrics-4c95,2", " echo "1296577907|1296577907.364468|NONE|Local/1234@from-internal@from-internal|PAUSEREASON|01" >> /var/log/asterisk/queue_log ") in new stack

Pause code 01 refers to our admin code so this is recording correctly.

Thanks

QueueMetrics

  • Loway
  • Hero Member
  • *
  • Posts: 2999
  • Karma: 39
    • View Profile
    • QueueMetrics
Re: All pause codes displaying "-"
« Reply #3 on: February 02, 2011, 17:06:10 »
Ok so this looks correct.

Can you post a piece of the queue_log, where you see an agent taking a call and then you make them go on pause?


Alexvs

  • Newbie
  • *
  • Posts: 7
  • Karma: 0
    • View Profile
Re: All pause codes displaying "-"
« Reply #4 on: February 02, 2011, 17:10:14 »
I think we've now sorted it and the problem was "1234@from-internal@from-internal" where it should only be "1234@from-internal". This has been changed and now we're seeing pause codes displayed correctly in both realtime and in the reports. Thanks for getting us to check this as we wouldn't have found it if not directed to look there.

Thanks

QueueMetrics

  • Loway
  • Hero Member
  • *
  • Posts: 2999
  • Karma: 39
    • View Profile
    • QueueMetrics
Re: All pause codes displaying "-"
« Reply #5 on: February 03, 2011, 09:21:28 »
Ah yes - how came you had it twice? :)

Alexvs

  • Newbie
  • *
  • Posts: 7
  • Karma: 0
    • View Profile
Re: All pause codes displaying "-"
« Reply #6 on: February 03, 2011, 10:37:01 »
Not quite sure to be honest I just told the IT team where to look and they figured it out and how to get around it. At least now it's fixed  :)

QueueMetrics

  • Loway
  • Hero Member
  • *
  • Posts: 2999
  • Karma: 39
    • View Profile
    • QueueMetrics
Re: All pause codes displaying "-"
« Reply #7 on: February 04, 2011, 11:17:51 »
 ;D