QueueMetrics > Outbound and QueueMetrics

Please help

(1/1)

Zerabox:
I am not that great with dial plans, we had your engineering write the dial plan for outbound calling so we could monitor the system. The monitoring works fine but we have two issues one issue was the adding of the digit 1 to all outgoing calls... I found that and removed it from the queuedial ... the one thats really bad is our outbound calls are showing the freepbx extension number and not the Outbound Caller ID in freepbx... this is serious because they need to have our call back number ... can someone please show me what to add or delete in the outgoing settings for queuedial ...

If I can't get the caller ID of the freepbx for the extension where can I hard code in for the agents only this number (8643352720) so the called party has our call back number.

Below is whats in the system ... and where I found the digit 1 being inputed.

[queuedial]
; this piece of dialplan is just a calling hook into the [qm-queuedial] context that actually does the
; outbound dialing - replace as needed - just fill in the same variables.
exten => _XXX.,1,Set(QDIALER_QUEUE=q-${EXTEN:0:3})
exten => _XXX.,n,Set(QDIALER_NUMBER=${EXTEN:3})
exten => _XXX.,n,Set(QDIALER_AGENT=Agent/${CALLERID(num)})
exten => _XXX.,n,Set(QDIALER_CHANNEL=Zap/g0/${QDIALER_NUMBER})
exten => _XXX.,n,Set(QueueName=${QDIALER_QUEUE})
exten => _XXX.,n,MixMonitor(Q-${QDIALER_QUEUE}-${UNIQUEID}.WAV|b|)
exten => _XXX.,n,Goto(qm-queuedial,s,1)
include => from-internal

[queuedial-loggedon]
; This piece of dialplan will let only logged on agents dial out
exten => _XXX.,1,Set(QDIALER_QUEUE=q-${EXTEN:0:3})
exten => _XXX.,n,Set(QDIALER_NUMBER=${EXTEN:3})
exten => _XXX.,n,Set(QDIALER_AGENT=Agent/${AGENTBYCALLERID_${CALLERID(num)}})
exten => _XXX.,n,Set(QDIALER_CHANNEL=SIP/${QDIALER_NUMBER})
exten => _XXX.,n,Set(QueueName=${QDIALER_QUEUE})
exten => _XXX.,n,MixMonitor(Q-${QDIALER_QUEUE}-${UNIQUEID}.WAV|b|)
exten => _XXX.,n,GotoIf($[${LEN(${QDIALER_AGENT})} > 6]?qm-queuedial,s,1)
exten => _XXX.,n,NoOp,Extension ${CALLERID(num)} is not logged on as agent.
exten => _XXX.,n,Playback(agent-loggedoff)
exten => _XXX.,n,Congestion


[qm-queuedial]
; We use a global variable to pass values back from the answer-detect macro.
; STATUS = U unanswered
;        = A answered    (plus CAUSECOMPLETE=C when callee hung up)
; The 'g' dial parameter must be used in order to track callee disconnecting.
; Note that we'll be using the 'h' hook in any case to do the logging when channels go down.
; We set the CDR(accountcode) for live monitoring by QM.
;
exten => s,1,NoOp,Outbound call -> A:${QDIALER_AGENT} N:${QDIALER_NUMBER} Q:${QDIALER_QUEUE} Ch:${QDIALER_CHANNEL}
exten => s,n,Set(CDR(accountcode)=QDIALAGI)
exten => s,n,Set(ST=${EPOCH})
exten => s,n,Set(GM=QDV-${QDIALER_AGENT})
exten => s,n,Set(GLOBAL(${GM})=U)
exten => s,n,Set(GLOBAL(${GM}ans)=0)
exten => s,n,Macro(queuelog,${ST},${UNIQUEID},${QDIALER_QUEUE},${QDIALER_AGENT},CALLOUTBOUND,-,${QDIALER_NUMBER})
exten => s,n,Dial(${QDIALER_CHANNEL},300,gM(queuedial-answer^${UNIQUEID}^${GM}^${QDIALER_QUEUE}^${QDIALER_AGENT}^${ST}))
exten => s,n,Set(CAUSECOMPLETE=${IF($["${DIALSTATUS}" = "ANSWER"]?C)})

QueueMetrics:
Do you mean you need to show a PSTN number as caller-id on the outgoing call?

I would do something like....

....
exten => s,n,Macro(queuelog,${ST},${UNIQUEID},${QDIALER_QUEUE},${QDIALER_AGENT},CALLOUTBOUND,-,${QDIALER_NUMBER})
exten => s,n,Set(CALLERID(all)=Joe Zebra <20955511111>)
exten => s,n,Dial(${QDIALER_CHANNEL},300,gM(queuedial-answer^${UNIQUEID}^${GM}^${QDIALER_QUEUE}^${QDIALER_AGENT}^${ST}))
....

See also http://www.voip-info.org/wiki/view/Setting+Callerid

Zerabox:
Thank you that was it, we found it on Sunday but that was the fix ...thanks Hero

QueueMetrics:
 ;D

Navigation

[0] Message Index